1. Introduction
The equipment mainly used for overturn 90° or 180° of work piece during the process of H-beam production. It is the special equipment for overturning and movable, which is widely used for welding overturning, straightening overturning and manual welding.
It also can be used in other applications. We also welcome special requirements.
2. Main Parameters
| Model |
FZ180 |
| Applicable work piece weight (t) |
≤20t |
| Travel motor power (kW) |
1.5 |
| Travel speed (m/min) |
5 |
| Overturning oil cylinder diameter (mm) |
φ150 |
| Max pressure of hydraulic system (MPa) |
16 |
| Rail center distance (mm) |
700 or upon actual conditions |
| Above are our standard models and parameters, and it can be designed and manufactured on request. |
| Model |
FZ90 |
| Suitable H-beam flange width (mm) |
200-800 |
| Suitable H-beam web height (mm) |
200-2000mm |
| Suitable work-piece weight (t) |
≤20T |
| Overturning oil cylinder diameter (mm) |
φ125 |
| Max pressure of hydraulic system (MPa) |
14 |
| Above are our standard models and parameters, and it can be designed and manufactured on request. |
| Model |
FZ60 |
| Tilting angle (O) |
0-60O |
| Overturning work piece weight (t) |
20t/group |
| Overturning oil cylinder diameter (mm) |
φ125 |
| Max pressure of hydraulic system (MPa) |
16 |
| Above are our standard models and parameters, and it can be designed and manufactured on request. |
*We reserve the right to alter specifications without prior notice.
3. Reference photo
Audited Supplier 
){kind=link}
){kind=link}