1000W Metal Fiber Laser Welding Machine Handheld Laser Welder for Stainless Steel Metal Plate Aluminum

• Warranty: 1 Year
• Application: Biomedicine, Electronic Industry, Automotive Industry, Manufacturing Industry
• Technical Class: Continuous Wave Laser
• Control: Automatic
• Power Density: Heat Conduct Welding
• Laser Classification: Optical Fiber Laser
• Model NO.: QBH
• Type: Laser Spot Welder
• Transport Package: Wooden Box
• Origin: China

Product Description

Item	Parameter
The interface type	QBH
Power regulation range	100~1000 W
Laser wavelength	1070~1080 nm
Spot adjustment	(0.2~5 ) mm
Collimated focal length	50 mm
Focus on the focal length	120/150 mm
Protective lenses	D 20X2 mm
Cooling mode	Circulating water cooling
Handle weight	2.2 KG
Mode selection	Point-line

I. The switch on and off steps

First of all, the machine is connected to the AC220V, 50HZ power supply, and the air source, wire feed interface is connected as shown in Figure 1 and then booted up.

The first step, as shown in Figure 2, push up the main power switch behind the fuselage and make sure it is in place.

In the second step, rotate the display key on the front panel 90° counterclockwise as shown in Figure 3, at which point the screen powers on and lights up.

The third step, press the front panel tank button and wait for about 30S, at this time you can hear a pronounced sound of water flow, then press the laser button, and open the cabinet door to screw the gear on the laser panel to the R file as shown in Figure 4, and then press the START button at this time The indicator on the laser panel is green

In the fourth step, the ground wire protection clip is clamped to the metal part of the welded workpiece at this time, and the welding operation can be carried out.

When shutting down, you should follow the above steps to reverse the shutdown, that is, first twist the gear key on the laser panel to 0 gear and then return the START button, and then turn off the laser, water tank, and display buttons in turn

II. Te operation panel description

The signal status is displayed on the page shown in figure above: Scan Speed Scan Width Peak Power Air Ratio Pulse Frequency.Laser enable indicates red light welding mode secure lock.

Laser enable	Control of the laser switching optical signal (in normal use, open the flash button to produce a light signal)
Indication of red light	Divided into linear and dot shapes, when using, keep the red light center alignment weld can be welded.Welding gun mold: divided into continuous and spot welding modes
Safety lock	Refers to the return signal generated by the gun head touching the metal plate.(The gun head touches the metal plate with crocodile clip conduction communication number light, this signal is the light protection function, and it is forbidden to short connect)
Scanning speed	Refers to the motor deflection speed, the default speed is 300 mm/s
Scanning width	Is the size of the light class, (0.2-6 mm) adjustable
Peak power	100-100 W adjustable, the thicker the welding material, the greater the power
Duty Cycle	0-100%
Pulse frequency	50-30000 HZ
Recommendation	Power select the appropriate optical power according to the thickness of the material that is not. The recommended frequency is 3000-500 HZ. Duty cycle: according to the requirements of the welding penetration depth. The duty cycle can be reduced appropriately when the thin plate does not penetrate the weld

 

If you need to adjust the welding process during welding, click the process button on the screen, enter the process page, and then make adjustments, and click after the adjustment is completed.

Import-save-return, then return to the main interface to view the modified parameters.

III. The welding gun head description

Because the tip structure is constantly adjusting, the picture may be slightly different from the actual product, the actual product shall prevail.

 

Below are the recommended parameters for common materials

1, Copper nozzle: customers can replace the corresponding nozzle (yin corner nozzle, yang angle copper nozzle wire feeding copper nozzle) according to different welding processes;

2, Rebar pipe: can be twisted threaded pipe to adjust the focal length, can adjust the distance value of ±10 mm;

3, Tracheal port: protective gas blowing port;

4, Conductive communication line: communicates with the copper nozzle, and the iron plate wire is touched when welding to produce a circuit, which plays a role in safety protection;

5, protective lens mounting port: protective lens plus water cooling structure, protective lens service life is more durable, it is recommended to wipe the protective lens dust once a day alcohol dust-free cotton swab;

6, Circulating waterway: The cold water circulation structure is used to cool down the reflective lens and the internal structure of the gun body;

7, Gun body handle: alumina process, lightweight and comfortable to hold;

8, Light trigger button: After changing the hand structure and trigger button position, it can be applied to the left and right hand operation, and the left-handed operation is inconvenient;

9, QBH locking sleeve: with the laser QBH connection end, pay attention to cleaning during installation, to avoid dust into the gun body.

 

Instructions for sending silk nozzles

Wire feeding nozzle U-shaped nozzle (short) U-shaped nozzle (long) pussy angle nozzle sending

(The standard is 4 kinds of welding nozzles, due to the continuous improvement of the gun type, the actual product may have slight differences, the actual product shall prevail).

Wire feeding nozzle: silk feeding universal use;

U-shaped nozzle (short): used for welding and angle welding; U-shaped nozzle (long): welding and angle welding;

IV. The cooling system description

1, Temperature Setting Methods

2, Cooling system operating requirements

3, Common fault handling of chillers

V. Common material welding parameter setting reference

The following parameter information is for reference only.

Stainless steel	Power(W)	Wire feeding speed (CM/S)	Scanning speed (mm/s)	Duty cycle
1 mm	400	40~60	200~300	100%
1.5 mm	580	50~70	200~300	100%
2 mm	740	40~60	200~300	100%
2.5 mm	900	40	200~300	100%
3 mm	1000	40	100~300	100%

Carbon steel	Power(W)	Wire feeding speed (CM/S)	Scanning speed (mm/s)	Duty cycle
1 mm	500	40~60	200~300	100%
1.5 mm	720	60~80	200~300	100%
2 mm	900	40~60	200~300	100%
2.5 mm	1000	40	100~300	100%

Galvanized sheet	Power(W)	Wire feeding speed (CM/S)	Scanning speed (mm/s)	Duty cycle
1 mm	500	60~80	200~300	100%
1.5 mm	630	60~80	200~300	100%
2 mm	740	40~60	200~300	100%
2.5 mm	900	40	200~300	100%
3 mm	1000	40	200~300	100%

Aluminum plate	Power(W)	Wire feeding speed (CM/S)	Scanning speed (mm/s)	Duty cycle
1 mm	650	60~80	30~50	100%
1.5 mm	780	60~80	30~50	100%
2 mm	920	40~60	30~50	100%
2.5 mm	1000	40	30~50	100%

C

Our Services & Strength

We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.

Based client's facility/site space availability, we are able to study/design and present matched configurations on project

schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.

To support project execution, we are always ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipments/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.

ONSTRUCTION SITE PHOTOS

 

 

 

COMPANY PROFILE